Wiring of fire dampers, smoke valves and smoke fire dampers
1. Name: fire damper. Actuator: DL-I close-range regulating actuator.
Function: fitted on the fire damper, normally open.
1. Manual reset.
2. Manual close, electric-signal close, thermal-link close.
3. Five fan-speed steps for airflow.
4. Operating current ≤ 0.7 A.
5. Torque: 9.5 N·m.
6. Product in use matches the type-tested product.
7. 250 reliable open/close cycles (national standard: 50).
Wiring diagram below:
2. Smoke fire damper. Actuator: DL-Ⅵ-3 two-action actuator.
Function: fitted on the smoke fire damper, normally closed, thermal link at 280°C.
1. Manual reset.
2. Manual open, electric-signal open.
3. Thermal link closes it again.
4. Operating current ≤ 0.7 A.
5. Torque: 9.5 N·m.
6. Product in use matches the type-tested product.
7. 250 reliable open/close cycles (national standard: 50).
3. Smoke valve. Actuator: DL-Ⅱ close-range, non-adjusting.
Function: fitted on the smoke outlet or supply outlet, normally closed.
1. Manual reset.
2. Manual open, electric-signal open, thermal-link open.
3. Operating current ≤ 0.7 A.
4. Torque: 9.5 N·m.
5. Product in use matches the type-tested product.
6. 250 reliable open/close cycles (national standard: 50).